Brought to you by Cavootle.com
This is the first in a four part series that will go through and show you the basics of getting the GH2 firmware patched with new settings that will allow bitrates 6x times higher than come stock with the camera.
Test the setting, click to download
I’ve been testing multiple GH2 settings for weeks, and I’ve wanted to reach the highest stable bitrate. I think 132mb GOP 3 is going to be fairly close to that for the time being. I’m no AVC expert, certainly someone who is will come up with the penultimate hacked GH2 settings in the next few months, like lpowell did with the GH13.
To get started with these settings, you’re first going to need one of these cards
Be certain to get one of the Extreme Pro cards, anything less will crash. The only other option is a Kingston Extreme XX card. In terms of sequential writes, both cards are very similar in writing performance, however the Kingston cards are more expensive and have faster reading speeds.
I need to find an SD card that can actually write 25MB per second across the card. I don’t think any of the current Class 10 cards will, maybe one of the UHS-1 cards, but I’ve read conflicting reports in any case. Why do I need to write at this speed? Well I’ve seen bursts over 180mb per second. The reason I’m using GOP 3 is because it actually saves the file when the camera crashes. With GOP 6 and GOP 12, I have to eject the battery and restart the camera. In any case, I’ll post a couple of PNG stills below from the peaked 186mb bitrate footage.
Again, this high of bitrate may never be stable on the GH2. It may not even be necessary for 4:2:0 1080p footage. Below are 3 PNG images taken directly from footage at 88mb, 132mb and 176mb. The 176mb footage is one stop brighter due to bumping the lens while flashing the camera. Everything else is the same.
176mb needs a fast card. Out of the few Class 10 cards I have, none are fast enough to record more than a few seconds at a time. This is the highest bitrate I’ve been able to record with the GH2, and it only works at GOP 3. I have no doubt someone in the future will push 200 with the right settings and right card. This setting is not stable. It’s stable enough for a few seconds, or stable while recording with the lens cap on – not really useful in real world situations. Low GOP settings are broken at this point as well with 3.62d, so this is in no way something you’d want to load on your GH2. Oh! In camera Black and White is fairly stable at this setting, probably due to the fact there is no chroma information being recorded and that drops the bitrate way down to the mid 90’s.
Be awesome, play this in the background while watching.
…
Here is my first preliminary test comparing the hacked GH2 vs the GH1. The GH2 was using the following settings
Ptool 3.61D
720p SH mode
48mb high
35mb low
GOP 15
This is not a recommended setting, but has been working just fine for me producing 720p footage with average bitrates over 40mb a second with out causing any errors on PNY cards.
1080p mode
44mb high
35mb low
Just a slightly higher bitrate than Vitality’s recommended settings. Again, Vitality is stressing not to mess with the GOP right now, as I did with 720p, so do so at your own risk.
The GH1 was using lpowell’s 75mb high reliability patch
Both cameras used the same lens, same f-stop WB kelvin and shutter settings. The GH1 was used at 100iso and the GH2 at 160iso accounting for the difference in ISO ratings between the cameras.…
